DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 73 / 134

Programming
Operating Instructions 911-211-10 - 00.0 - 10/2020 71
Information
The remaining thread monitor (MP 1, Optional equipment ) and the bobbin
counter (MP 6) can be activated simultaneously. The display shows the
two options as follows:
Fig. 49: Remaining thread monitor and bobbin counter
Pedal mode
The following options are available:
•
Mode 1: The current position of the pedal is evaluated
• Mode 2 (Def.): The pedal must be returned to the initial position after
every press before a new press is recognized
• Mode 3: The current position of the pedal is evaluated. The quick-start
mode is also enabled (see Load mode (

p. 61 )). The machine must
be switched off and on in order to activate the quick-start mode.
• Push button: In push button mode one sensor is used only for
controlling the clamp motion (up and down). The other sensor is used for
starting the sewing process.
Barcode mode
The following options are available:
•
Manual: Machine checks whether the inserted clamp matches the
entered seam program. If the clamp is correct, the machine is ready for
sewing. If the clamp is incorrect, an error message will be displayed, and
the clamp will have to be replaced.
• Automatic: The machine looks for the seam program that matches the
inserted clamp. The machine is ready for sewing once the seam program
has been selected.
Symbol Meaning
(1) - Display - remaining thread monitor:
Remaining thread monitor active:
R shown
Remaining thread monitor inactive:
R hidden
(2) - Display - bobbin counter:
Bobbin counter active: Number black
Bobbin counter inactive: Number
grayed-out
① ②