DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 83

Page: 83 / 134

Programming

Operating Instructions 911-211-10 - 00.0 - 10/2020

Press the desired symbol and execute the function.

5.13.3 Testing the sewing motor

To test the sewing motor:

In the menu item

Extras

Service

Multi test

press

the

Test sewing

motor

option.



The sewing motor test screen is displayed:

Fig. 54: Testing the sewing motor

Symbol

Meaning

Perform a reference run

Check the movement

Switch between jumping foot and presser foot

Switch over the mode of operation

Go to position

Adjust the sewing foot height

Switch off the power to the drives

Manually check the freedom of motion of the sewing foot rod

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Do not reach into the machine during the function
test of the motor.

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands