DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 19 / 134

Operation
Operating Instructions 911-211-10 - 00.0 - 10/2020 17
4.3 Changing the needle
Fig. 4: Changing the needle
To change the needle:
1. Push the hand crank (1) down and rotate it to the left until the needle
bar (6) reaches the highest position.
2. Loosen threaded pin (4) (threaded pins (4) and (5) for long needles).
3. Pull the needle downwards out of the needle bar (6).
WARNING
Risk of injury from sharp parts!
Puncture possible.
Switch off the machine before you change the
needle.
NOTICE
Property damage may occur!
Risk of damage to machine and thread if hook clearance is incorrect.
When switching to a different needle thickness, adjust the distance
between hook and needle.
(1) - Hand crank
(2) - Cylinder pin
(3) - Groove
(4) - Threaded pin
(5) - Threaded pin
(6) - Needle bar
①
②
③
④
⑤
⑥