DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 70

Page: 70 / 134

Programming

Operating Instructions 911-211-10 - 00.0 - 10/2020

Press the

Copy File

button.



The selected file is copied to the USB key or the control.

5.10.8 Deleting a seam program or seam sequence

Seam programs or seam sequences that are no longer required can be
deleted from the control.

To delete a seam program or a seam sequence:

Press the menu items

File

Delete



The window for selecting the file to be deleted appears:

Fig. 47: Deleting a seam program or seam sequence

Information

You can use the

File Filter

to make the list more manageable

(



p. 42

Press the desired file.



The selected file is highlighted with a dark background.

Press the

Delete

button.



The selected file is deleted.

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands