DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 82 / 134

Programming
80 Operating Instructions 911-211-10 - 00.0 - 10/2020
5.13.2 Adjusting the stroke position
To adjust the stroke position:
1. In the menu item
Extras
>
Service
>
Multi test
press the
Set stroke position option.

The following options are displayed:
Output elements
No. Meaning
Y1 Foot mode
Y2 Hook cover
Y3 Needle cooling on
Y4 Right clamp
Y5 Left clamp
Y9 Threading switch lamp on
Y10 Oil level indicator warning light on
Y11 Burner transformer on
Y12 Upper burner
Y13 Lower burner
Y14 Thread suction device
Y25 Marking lamp 1 (Z)
Y26 Marking lamp 2 (Z)
Y27 Marking lamp 3 (Z)
Y28 Marking lamp 4 (Z)
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Do not reach into the machine when setting the
stroke position.
Switch off the power to the drives when you wish to
test the freedom of motion of the sewing foot rod.