DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 76 / 134

Programming
74 Operating Instructions 911-211-10 - 00.0 - 10/2020
Information
The remaining thread monitor (MP 1, Optional equipment ) and the bobbin
counter (MP 6) can be activated simultaneously. The display shows the
two options as follows:
Fig. 50: Remaining thread monitor and bobbin counter
MP6 - Counters
Symbol Meaning
Counter type
The following options are available:
•
Increment counter (Def.): The counter is incremented after each sewn
program
• Decrement counter : The counter is decremented after each sewn
program
• Increment seam sequence counter: The counter is incremented after
each seam sequence sewn
• Decrement seam sequence counter: The counter is decremented after
each seam sequence sewn
Reset value for the counter
(min. = 0 .. max. 9999; Def. 0)
Value to which the counter is set when a counter reset is performed
Adjust seam count for bobbin reserve
(min. = 0 .. max. 100; Def. 0)
A message is displayed to the user after the number of seams specified
here have been sewn. A value of 0 deactivates the function
Bobbin supply capacity
(min. = 0.0 .. max. 400.0; Def. 0.0 m)
A message is displayed to the user after the bobbin supply capacity has
been consumed. A value of 0 deactivates the function
(1) - Display - remaining thread monitor:
Remaining thread monitor active:
R shown
Remaining thread monitor inactive:
R hidden
(2) - Display - bobbin counter:
Bobbin counter active: Number black
Bobbin counter inactive: Number
grayed-out
① ②