DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 90

Page: 90 / 134

Maintenance

Operating Instructions 911-211-10 - 00.0 - 10/2020

6.1

Cleaning

6.1.1 Cleaning the machine

Sewing dust and thread residues should be removed after every 8 operating
hours using a compressed air gun or a brush. If very fluffy sewing material
is being sewn, the machine must be cleaned more frequently.

Fig. 58: Cleaning the machine

WARNING

Risk of injury from flying particles!

Flying particles can enter the eyes, causing injury.

Wear safety goggles.
Hold the compressed air gun so that the particles
do not fly close to people.
Make sure no particles fly into the oil pan.

NOTICE

Property damage from soiling!

Sewing dust and thread residues can impair the operation of the
machine.

Clean the machine as described.

NOTICE

Property damage from solvent-based cleaners!

Solvent-based cleaners will damage paintwork.

Use only solvent-free substances for cleaning.

(1)

- Area around the needle

(2)

- Hook

(3)

- Area under the throat plate

(4)

- Knife on the winder

①
②

③

④

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands