DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 25

Page: 25 / 134

Operation

Operating Instructions 911-211-10 - 00.0 - 10/2020

Needle thread threading on machines with a thread burner

Fig. 8: Needle thread threading on machines with a thread burner

13. For machines with a thread burner: Position the thread in the suction

opening (19).

14. Press the button for the suction device (18).

NOTICE

Property damage may occur!

If the thread was not positioned in the suction opening, disturbances
and damage may occur in the area of the hook.
It is even possible that the clutch may disengage, which may
necessitate more extensive repairs.

ALWAYS position the needle thread in the suction opening.

(18) - Button for suction device

(19) - Suction opening

⑱

⑲

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands