DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 102

Page: 102 / 134

Setup

100

Operating Instructions 911-211-10 - 00.0 - 10/2020

Fig. 67: Adjusting the pedal

To adjust the pedal:

Position the pedal (1) in front of the machine so that pedal and machine
can be comfortably operated.

7.5

Assembling the reel stand

Fig. 68: Assembling the reel stand (1)

To assemble the reel stand:

Insert the reel stand (1) into the hole in the tabletop.

Assemble the reel stand (1) to the tabletop using the nuts (2).

Assemble the thread reel holder (3) and the thread guide (4) onto the
reel stand in such a way that they are located precisely above one
another.

(1)

- Pedal

①

(1)

- Reel stand

(2)

- Nut

(3)

- Thread reel holder

(4)

- Thread guide

①

②

④

①

③

②

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands