DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 91

Page: 91 / 134

Maintenance

Operating Instructions 911-211-10 - 00.0 - 10/2020

Areas particularly susceptible to soiling:

• Knife on the winder (4)

• Area under the throat plate (3)

• Hook (2)

• Area around the needle (1)

To clean the machine:

Remove any dust and thread residues using a compressed air gun or
a brush.

6.1.2 Cleaning the motor fan mesh

The motor fan mesh must be cleaned once a month using a compressed
air gun. If very fluffy sewing material is being sewn, the motor fan mesh
must be cleaned more frequently.

Fig. 59: Cleaning the motor fan mesh

To clean the motor fan mesh:

Remove any sewing dust and thread residues using a compressed air
gun.

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands