DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 107 / 134

Setup
Operating Instructions 911-211-10 - 00.0 - 10/2020 105
7.8 Performing a test run
When setup is complete, perform a test run to check the functionality of
the machine.
To perform a sewing test:
1. Switch on bobbin change mode.
2. Thread the needle thread (

p. 20 ).
3. Insert the bobbin (

p. 26 ).
4. Switch off bobbin change mode.

The control is started up.
5. Press the pedal backwards.

The reference run starts.
The transport carriage moves to the reference position.
Information
The reference run is necessary in order to obtain a defined starting
position of the transport carriage.
6. Press the pedal forwards.

The machine moves to the loading position for the material to be
sewn.
7. Load / insert the material or clamp.
8. Press the pedal forwards.
9. The sewing procedure is started.