DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 28 / 134

Operation
26 Operating Instructions 911-211-10 - 00.0 - 10/2020
9. Press the bobbin winder flap (4) against the bobbin.

The winder starts and stops automatically when the configured
bobbin filling volume is reached.
4.8 Changing the bobbin
Fig. 11: Changing the bobbin (1)
To change the bobbin:
1. Remove the sewing material holder (1) (for alternating clamps only).
2. Press the threading mode (2) button.

The machine is in threading mode.
The button (2) lights up.
The carriage moves to the bobbin change position.
The sewing feet are lowered.
The hook cover (3) is opened and lit.
WARNING
Risk of injury from sharp and moving parts!
Puncture or crushing possible.
Switch the machine to threading mode before
changing the bobbin.
When threading mode is active, do not reach into
the hook area until the cloth pressure bar has
moved down.
(1) - Sewing material holder
(2) - Button for threading mode
(3) - Hook cover
① ② ③