DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 53 / 134

Programming
Operating Instructions 911-211-10 - 00.0 - 10/2020 51
5.8.2 Continuing a seam after thread breaking
When the machine was set up, the needle thread monitor mode that is
supposed to be active was selected in the machine parameters
(MP 3 (

p. 72 )).
In the event of an error, the machine will undo a certain number of preset
stitches and stop.
The control panel will show the display
Fix thread breakage
:
Fig. 36: Continuing a seam after thread breaking
Continuing a seam
To continue a seam after thread breaking:
1. Re-thread the needle thread.
2. Use the Forwards and Back buttons to move to the point where sewing
is to continue.
3. Continue sewing.
Canceling sewing and starting a new seam
To cancel sewing after thread breaking and start a new seam:
1. Press the Cancel button.
2. Remove the transfer plate.
3. Press the pedal backwards.

The machine performs a reference run.
4. Press the pedal forwards.

The machine moves to the loading position, and you can start a new
seam.