DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 111

Page: 111 / 134

Disposal

Operating Instructions 911-211-10 - 00.0 - 10/2020

109

Disposal

The machine must not be disposed of in the normal household waste.

The machine must be disposed of in a suitable manner in accordance with
all applicable national regulations.

When disposing of the machine, be aware that it consists of a range of
different materials (steel, plastic, electronic components, etc.). Follow the
national regulations when disposing these materials.

CAUTION

Risk of environmental damage from improper
disposal!

Improper disposal of the machine can result in
serious environmental damage.

ALWAYS comply with the national regulations
regarding disposal.

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands