DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 101

Page: 101 / 134

Setup

Operating Instructions 911-211-10 - 00.0 - 10/2020

7.3

Adjusting the working height

Fig. 66: Adjusting the working height

To adjust the working height:

Push the height adjustment switch (1) up.



The tabletop is raised.

Push the height adjustment switch (1) down.



The tabletop is lowered.

7.4

Pedal setup

The pedal can be freely positioned in front of the machine as far as the
cable allows.

CAUTION

Risk of musculoskeletal damage from incorrect
setting!

The operator can sustain musculoskeletal damage
if failing to comply with the ergonomic
requirements.

Adjust the working height to the body height of the
person who will operate the machine.

(1)

- Height adjustment switch

①

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands