DURKOPP ADLER 911-211-10, Operating Instructions Manual

Page: 84 / 134

Programming
82 Operating Instructions 911-211-10 - 00.0 - 10/2020
Important
Remove the thread from the needle and the thread lever before starting
the test.
2. Press the button.

The window for entering the speed opens.
3. Enter the desired value (300 - 2000 rpm).
4. Press the button.

The window for entering the cutting speed opens.
5. Enter the desired value (70 - 500 rpm).
6. Press the button.

The sewing motor runs at the entered speed.
7. Press the button.

The sewing motor stops.
8. Press the button.

The sewing motor runs at the entered speed.
9. Press the button.

The sewing motor stops, and the thread trimmer is actuated.
5.13.4 Calling up log displays and error lists
You can access the log settings and error lists via Extras > Service >
System information .
To call up log displays and error lists:
1. Press the menu items Extras > Service > System
information .

The selection screen for system information appears.
Fig. 55: Calling up log displays and error lists