DURKOPP ADLER 911-211-10 Operating Instructions Manual Download Page 31

Page: 31 / 134

Operation

Operating Instructions 911-211-10 - 00.0 - 10/2020

Adjusting the hook thread tension

Fig. 14: Adjusting the hook thread tension

The hook thread tension is generated by the tension spring (1) and
adjusted via the adjusting wheel (2).

To adjust the hook thread tension:

Turn the adjusting wheel (2).

• Increase the hook thread tension: Turn the adjusting wheel (2)

clockwise

• Reduce the hook thread tension: Turn the adjusting wheel (2)

counterclockwise

WARNING

Risk of injury from sharp and moving parts!

Puncture or crushing possible.

Switch the machine to bobbin change mode before
adjusting the hook thread bobbin.

(1)

- Tension spring

(2)

- Adjusting wheel

①

②

Summary of Contents for 911-211-10







































































































































Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands

DURKOPP ADLER 911-211-10, Operating Instructions Manual

Search results

Summary of Contents for 911-211-10

Reviews:

Related manuals for 911-211-10

Brands by name

Popular brands