Dräger Fabius 4116029 Technical & Service Manual Download Page 198

Page: 198 / 328

Fabius

Repair Instructions

3-130

Cop

ight

2000 Dr

aeger

edical,

sec3_

repa

instr

uc_c.

• Turn motor upside down.

• Disconnect cable connector from motor.

• Remove screws

from motor.

Fig.122:

Bottom view of the motor, removing the fixing screws

• Replace the motor with a new one.

• Mount motor using the reverse method of that used for dismounting

making sure

the cables are installed correctly

• Connect cable connector

to motor.

Fig.123:

Top view of the ventilator, connecting the cable connector

• Mount ventilator to Fabius using the reverse method of that used for disassembly.

• Check motor’s function according to Test Certificate.

yellow

grey

green

white

brown

RETURN TO CD-ROM TABLE OF CONTENTS

RETURN TO THIS MANUAL'S TABLE OF CONTENTS

Summary of Contents for Fabius 4116029








































































































































































































































































































































Search results

Summary of Contents for Fabius 4116029

Reviews:

Dräger Fabius 4116029, Technical & Service Manual, Page: 198 / 328

Search results

Summary of Contents for Fabius 4116029

Reviews: