Docomo FOMA P704IU, User Manual

Page: 85 / 528

83
The image through the receiving end’s
camera appears on the display and the
sound comes out of the speaker.
You cannot set voice-only Remote
Monitoring.
During Remote Monitoring, the receiving end
cannot operate anything other than pressing
to end Remote
Monitoring.
Make a videophone call notifying your caller ID. If the caller ID is
not notified, Remote Monitoring will not start and the call will be
handled as an ordinary incoming videophone call.
Perform Remote Monitoring
1
Make a videophone call from a
stored phone number.
After the ring time set for Remote Monitoring
elapses, Remote Monitoring automatically
starts.
Remote Monitoring
display
2
Remote Monitoring ends when the calling end
or receiving end presses
.
To answer the videophone call without starting Remote
Monitoring at the receiving end
You can press or to answer the videophone call before
the FOMA phone answers it automatically and send the image
through your camera to the other party. If you press
( ), the
videophone call starts by sending the substitute image to the other
party.
When a remote monitoring call comes in, “Set when opened” is
disabled.
If you press when a remote monitoring call comes in, the call will
be cut and Remote Monitoring will not start.
Information
When your FOMA phone is used for the receiving end, an image
through the camera at the calling end appears, and sound comes out.
(You cannot switch to a substitute image.)
Remote Monitoring is not performed during Manner Mode and Public
Mode (Drive Mode). However, it is performed even during Lock All.
When Remote Monitoring is set to “ON” and a videophone call comes
in from “Other ID”, Remote Monitoring starts after the set ring time,
even when “Ring time”, “Automatic answer”, or “Record message” is
set and regardless of their ring times.
When Remote Monitoring is not performed, it is recorded in Received
Calls as a missed videophone call.
If the Flat-plug Earphone/Microphone with Switch (option) is
connected when a remote monitoring call comes in, the ring tone
will sound from both the earphone and the speaker, even when
“Earphone” of “External option” is set to “Earphone”.
The ring tone for Remote Monitoring sounds. (You cannot change the
ring tone.)
The ring tone sounds at the volume set for “Videophone” of “Ring
volume”, but at “Level 2” if you have set “Step”, “Level 1” or below.
The flickering color is “Gradation”, and its flickering pattern is
“Standard”, regardless of the Illumination setting.
You cannot put incoming remote monitoring calls on hold.
If you set both Call Forwarding Service and Remote Monitoring, and
give priority to Remote Monitoring, set its ring time shorter than that for
Call Forwarding Service.
To use Call Forwarding Service for Remote Monitoring, store the
phone number of dialing side as “Other ID” and set a 3G-324M
videophone as the forwarding destination.
You may be imposed punishment according to the law and rule
(such as the nuisance prevention ordinance) if you use the FOMA
phone to give a remarkable nuisance and misdeed to the public.
Please be considerate of the privacy of individuals around you when
shooting and sending photos using camera-equipped mobile phones.
V
oice/V
ideophone Calls
Ź
Remote Monitoring