Docomo FOMA P704IU, User Manual

Page: 134 / 528

132
Using Face Reader
<Face Reader Setting>
You can store your face data files in Face Reader and use it for
authentication when releasing PIM Lock.
To use Face Reader, you need to store three or more face data
files and set “Security mode” of “PIM lock settings” to either
“Face reader” or “Double security”.
Notes on using Face Reader
The dirty camera might result in erroneous operation. Use this
function after wiping it with a soft cloth to clean the dirt off.
In environment where the face is exposed to strong light and the
brightness significantly differs depending on the region of the face, the
face will not be recognized easily. In this case, storing might become
difficult or the recognition rate (the rate of correct identification) might
be lowered. Adjust so that the face is exposed to even light.
The face might not be recognized normally when its entire part is
exposed to the light and becomes white.
Storing the face might become difficult or the recognition rate might be
lowered when the face conditions are as described below:
・
When the features of the face (eyes, mouth, nose, and eyebrows,
etc.) are hard to see as they are covered by hair, glasses, or a mask
・
When the brightness significantly differs depending on the region of
the face such as when you are under the light in a dark place
The recognition rate might rise by reacting in accordance with the
face conditions such as by raising the hair so that the eyes, nose,
mouth, and eyebrows are clearly visible (taking the glasses and mask
off) or moving to a place where the face is exposed to even light. The
recognition rate rises also by storing the face data file additionally.
The face authentication technology does not completely guarantee
that you are recognized as yourself. Accordingly, we are not at all
responsible for damages resulting from the use of this product by a
third party or when the damages are caused by what you could not
use the function because of wrong authentication by Face Reader.
Store
To use Face Reader, store 3 or more face data files. You can
store up to 10 face data files.
Setting at purchase Not stored
1
▶ ▶
Lock/Security
▶
Face reader setting
▶
Enter your Terminal Security Code
▶
Store
▶
OK
Face to the front, and locate the face within the guide frame.
You can prevent the failure in authenticating the face data file,
which results from the difference in the position of the face at
storing and authenticating the data. When your face is recognized,
the recognition frame for the eyes and mouth is displayed, and the
guide frame becomes green.
When the recognition frame is not displayed or it comes off your eyes
and mouth, place your face off the frame; then change the facing
direction of your face to correctly display the recognition frame.
The number of face data files is displayed by the bar on the Face
Data Reading display.
Face Data Reading display
Guide frame
Recognition frame
Stored number bar
2
Press ( ).
The face data file is shot.
When the face data file could not be recognized, select “OK” to return
to step 1.
Face Reader Setting
Ż
Security Settings