Docomo FOMA P704IU, User Manual

Page: 513 / 528

44
1
Making Dial-up Connection
Perform the operation on page 3 to connect the
FOMA phone to your personal computer.
“
[スタート
(Start)
]
”
Ź
Open “
接続先
(Access point)”.
2
3
4
5
Select access point and click “
接続
(Connect)”.
Confirm the contents and click “
ダイヤル
(Dial)”.
Ɣ
When connecting to “mopera U” or “mopera”, you can leave
the user name and password fields blank.
The display appears to indicate the
connecting state.
In this period, the system performs logon processing to
confirm the user name and password.
After the connection is completed, click
“
閉じる
(Close)”.
Ɣ
You can start the browser software to browse web pages,
use e-mail and so on.
Ɣ
Use the FOMA phone with the dial-up setting completed for dial-
up connection. To connect another FOMA phone, you may need
to reinstall the communication setup files (driver).
Ɣ
The power consumption of the FOMA phone increases during
communication.
Ɣ
During packet communication, the communication state appears
on the FOMA phone.
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
Ɣ
During 64K data communication, “ ” appears on the FOMA
phone.
Information
1
2
Disconnecting
Click the dial-up icon on
the task tray.
Select “
接続または切断
(Connect or
disconnect)”, then click “
切断
(Disconnect)”
Ź
Click “
閉じる
(Close)”.
Ɣ
The communication line may not be disconnected by only exiting
the browser software. To surely disconnect the communication
line, perform this operation.
Ɣ
The baud rate displayed on your personal computer may be
different from the actual one.
Information