Docomo FOMA P704IU, User Manual

Page: 312 / 528

310
Using Infrared Remote-controller Function
You can use the FOMA phone as a TV remote-controller by starting
the i-
D
ppli program.
To use remote-control devices, you may need to download the software
program for those devices. [The pre-installed “G
ガイド番組表リモコン
(G Guide Program List Remote Controller)” supports the infrared remote-
controller function.] The key operation for the remote-controller differs
depending on the software program.
This function does not work with some devices.
Communication might be affected by compatible devices and the
ambient light.
You cannot use the infrared remote-controller during Self Mode.
Infrared Remote Controller
Aim the FOMA phone’s Infrared
data port at the front of a device to
be operated. You can operate up to
about 4 meters away from the device.
The radiation angle of the infrared
rays is within ±10° from the center.
Communication Setting
<Forwarding Image>
Setting at purchase ON
For when you forward Phonebook entries using infrared rays,
SD-PIM, or DoCoMo keitai datalink, you can specify whether to
forward the stored still images together.
1
▶ ▶
Forwarding image
▶
ON or OFF
Printing Saved Images
Still image in play/Still Image List
▶
( )
▶
DPOF setting
▶
Print
▶
Enter the number of copies to be printed out.
Enter “01” through “99” in two digits.
To cancel printing the selected still image, select “Print OFF”.
To cancel printing all still images, select “All print OFF”.
DPOF is the format for recording the print information about the
still image you shot with a digital camera.
You can input the information into the still image on the microSD
memory card about whether to print it out and how many copies
you print out. You can take the card to DPE service shops or use a
DPOF compatible printer to print photos as you specify.
Select a Method to Print the Images Saved on the
microSD Memory Card
Information
The classification icon of the images set DPOF Setting is “ ” or “ ”.
You can set DPOF Setting for up to 999 image files.
You cannot set DPOF Setting for the image in excess of 700 Kbytes or
1,632 x 1,224 dots.
DPOF Setting by other devices such as personal computers is disabled
except the information about the number of copies to be printed out.
If unused space on the microSD memory card is not enough, DPOF
Setting might not be set. (The icon and Picture Information, however,
indicate DPOF is set.) Delete unnecessary files, make memory space,
and then try again.
1
Using Infrared Remote-controller Function
Ż
Data Display/Edit/Management
Within about
4 meters
Within ±10°
from the center
Infrared data port