Docomo FOMA P704IU, User Manual

Page: 520 / 528

51
AT command Outline Parameter/Explanation
Command execution
example
AT+GMR
[M]
Displays the version of the
FOMA phone.
−
AT+GMR
Ver1.00
OK
AT+IFC=n,m
[M]
[&F][&W]
Selects the
fl
ow control
method.
n: DCE by DTE
m: DTE by DCE
0: No
fl
ow control
1: XON/XOFF
fl
ow control
2: RS/CS (RTS/CTS)
fl
ow control Default: n,
m = 2.2
AT+IFC?: Inquires the set value.
AT+IFC=2,2
OK
AT+WS46=n
[M]
[&F][&W] Selects the wireless
communication network of
the FOMA phone. n=22: W-CDMA (Wideband CDMA) only
speci
fi
able. (default)
AT+WS46=22
OK
ATA
[M]
Performs the receiving
process in the mode when
the FOMA phone received
the incoming call.
−
RING
ATA
CONNECT
ATD
[M]
Performs the automatic
outgoing process to the
FOMA phone according to
the contents speci
fi
ed in the
parameter and dial parameter.
<cid>: 1 to 10
Displays the APN de
fi
ned by +CGDCONT.
When calling cid1, you can omit the phone
number like “ATD
½
99
½½½
#.”
ATD
½
99
½½½
1#
CONNECT
ATEn
[M]
[&F][&W] Sets whether echo-back
is issued to the DTE in the
command mode. n=0: Issues no echo-back.
n=1: Issues echo-back. (default) ATE1
OK
ATHn
[M]
Places the FOMA phone
into the on-hook state. n=0: Disconnects the line. (can be omitted) (During packet communication)
+++
ATH
NO CARRIER
ATIn
[AT][M]
Displays the ID code. n=0: Displays “NTT DoCoMo”.
n=1: Displays the product name. (same as +GMM)
n=2: Displays the version of the PPP packet
function. (same as +GMR)
ATI0
NTT DoCoMo
OK
ATI1
FOMA P704imyu
OK
ATOn
[M]
Returns from the online
command mode to the
online data mode during
communication. n=0: Returns from the online command mode to
the online data mode. (can be omitted)
ATO
CONNECT
ATQn
[M]
[&F][&W]
Sets whether the result
code is to be displayed for
the DTE. n=0: Displays the result code. (default)
n=1: Does not display the result code. ATQ0
OK
ATQ1
(“OK” is not returned at this
time.)
ATS0=n
[M]
[&F][&W]
Sets the number of rings
required until the FOMA
phone automatically
receives an incoming call. n=0: Does not automatically receive an incoming
call. (default)
n=1 to 255: Automatically receives an incoming
call with the speci
fi
ed number of rings.
(when n
≧
10, does not automatically receive
a packet (PPP) incoming call, then the line is
disconnected after about 30 seconds.)
ATS0?: Inquires the set value.
ATS0=0
OK
ATS0?
000
OK
ATS2=n
[M]
[&F]
Sets the escape character. n=43: Default
n=127: Makes escape processing invalid.
ATS2?: Inquires the set value.
ATS2=43
OK
ATS2?
043
OK
ATS3=n
[M]
[&F]
Sets the carriage return
(CR) character. n=13: Default (n=13 only speci
fi
able)
ATS3?: Inquires the set value.
ATS3=13
OK
ATS3?
013
OK
0GZV2CIG 0GZV2CIG