Docomo FOMA P704IU, User Manual

Page: 135 / 528

133
3
Press ( ).
The face data file you have shot is stored. Repeat step 2 and step 3 to
store three or more face data files.
When the third face data file is stored, the message appears
telling that Face Reader can be more easily used by adding face
data files.
To store additional face data files, select “OK”, and perform the
operation for storing the face data file again from “Store” in step 1.
To end the operation, select “OK”, and then end.
To press , the confirmation display appears asking whether to
delete the face data file. Select “YES” to return to the Face Data
Reading display.
If you try to store the face data file in the same environment, you
might not be able to store it. Change the direction of the face or
the place for shooting.
Information
At shooting, the Call/Charging indicator flickers in red and the shutter
tone sounds regardless of the Manner Mode setting.
The sound volume for shutter tone cannot be changed. However, the shutter
tone does not sound during playing back a music file by SD-Audio or in
pause state.
Function Menu of the Face Data Reading Display
Function menu Operation/Explanation
Brightness
▶
Select a brightness level.
You can adjust to -3 (dark) t3 (bright).
You can adjust brightness also by pressing from
the Face Data Reading display.
Help You can check the cautions for shooting.
You can bring up Help also by pressing from the
Face Data Reading display.
At checking, press .
At Face Reader
start-up
±
0
Delete Stored Images
You can reset all the face data files stored in Face Reader.
1
▶ ▶
Lock/Security
▶
Face reader setting
▶
Enter your Terminal Security Code
▶
Delete stored images
▶
YES
Information
You cannot reset face data files during PIM Lock.
When you reset the face data files, “Security mode” of “PIM lock
settings” is set to “Security code”.
Recognition-failed Image
Up to five images that are not judged as you by Face Reader
recognition operation are saved. When the number of images
exceeds five, the oldest data is overwritten. You can use these
images to specify who tried to illegally access your data.
1
▶ ▶
Lock/Security
▶
Face reader setting
▶
Enter your Terminal Security Code
▶
Recog. failed image
▶
Select an image.
To delete the recognition-failed images; ( )
ĺ
“Delete
this” or “Delete all”
ĺ
“YES”. When you select “Delete all”, you
need to enter your Terminal Security Code.
Security Settings
Ź
Face Reader Setting