Docomo FOMA P704IU, User Manual

Page: 137 / 528

135
Use Face Reader to Release Lock
When “Security mode” is set to “Face reader”, use Face Reader to
release the lock instead of using your Terminal Security Code.
When it is set to “Double security”, use Face Reader for authentication
and then enter your Terminal Security Code to release the lock.
1
Display for releasing PIM Lock
▶
Match the face to the guide frame and press
( ).
Face Data Reading display
Guide frame
Recognition frame
Face to the front, and locate the face within the guide frame. The
recognition frame for the eyes and mouth is displayed, and the guide
frame becomes green. When the recognition frame is not displayed
or it comes off, place your face off the frame; then change the facing
direction of your face to correctly display the recognition frame.
Perform the operation for authentication with the same facial
expression as when you stored the face data file.
Press ( ) and enter your Face Reader Security Code; then
you can operate to authenticate instead of using Face Reader.
◆
Face Reader Security Code
Ÿ
page 134
Information
<Timer lock ON at close>
When the Stand-by display is not shown, or when another function is
working with the Stand-by display shown, the lock is not set even after
the specified time has elapsed.
When a call or mail message comes in after closing the FOMA phone,
or when you open it, the elapsed time counter returns to 0 seconds.
When “Timer lock ON at close” is set, the lock is temporarily released
if you operate to release PIM Lock. However, it is re-locked when the
specified time has elapsed after closing the FOMA phone.
<Lock OFF at open>
When the Stand-by display is not shown, or when another function is
working with the Stand-by display shown, the display for releasing the
lock does not appear by opening the FOMA phone.
<Security mode>
You cannot change security mode during PIM Lock.
▶▶
Next Page
Security Settings
Ź
Face Reader Setting