Docomo FOMA P704IU, User Manual

Page: 489 / 528

20
1
2
3
4
5
<When you can select the COM port number of
“FOMA P704i
ȝ
”>
Select the COM port number with which you install the
“FOMA P704i
ȝ
” in the “
接続方法
(Connection method)” field,
then click “OK”.Then, go to step 6.
Ɣ
Here, “COM3” is selected as an example. See page 19
for the COM port number of “FOMA P704i
ȝ
” you should
actually select in the “
接続方法
(Connection method)” field.
6
0GZV2CIG 0GZV2CIG
Set an Access Point Name (APN)
The operation below explains how to set an access
point name (APN) for packet communication. You
can register up to 10 access point names (APNs),
which are managed with cid1 to cid10 (see page 21).
When using “mopera U” or “mopera”, you do not
need to set the access point name (APN).
The operation below is the example where you use
“XXX.abc” as the access point name (APN) and
use the FOMA USB Cable (option). For the actual
access point name (APN), contact your Internet
service provider or network administrator.
The setting here will be the access point number
for dial-up network setting (see page 22).
For Windows
®
XP
Select the connection method.
Connect the FOMA USB Cable to the
FOMA phone.
Turn on the power to the FOMA phone,
then connect the FOMA USB Cable,
which is already connected to the FOMA
phone, to the personal computer.
Start Hyper Terminal.
“
スタート
(Start)”
ĺ
“
すべてのプログラム
(All programs)”
ĺ
“
アクセサリ
(Accessories)”
ĺ
“
通信
(Communications)”
ĺ
Open “
ハイパーターミナル
(Hyper Terminal)”.
After starting Hyper Terminal, when the message “
『既定の
Telnet
』プログラムにしますか
? (Select the specified Telnet
program?)” is displayed, set as desired. Contact the maker
of your personal computer and Microsoft Corporation for the
setting contents.
Ɣ
For Windows
®
2000 Professional, “
スタート
(Start)”
ĺ
“
プログラム
(Programs)”
ĺ
“
アクセサリ
(Accessories)”
ĺ
“
通信
(Communications)”
ĺ
Open “
ハイパーターミナル
(Hyper Terminal)”.
Enter any name in the “
名前
(Name)”
field, then click “OK”.
Here, “Sample” is entered as an example.
<When you cannot select the COM port number
of “FOMA P704i
ȝ
”>
Click “
キャンセル
(Cancel)” to close the “
接続の設定
(Set a
connection)” display, then perform the following operations:
(1)“
ファイル
(File)” menu
ĺ
Select “
プロパティ
(Properties)”.
(2)Select “FOMA P704i
ȝ
” in the “
接続方法
(Connection
method)” field of the “
接続の設定
(Set a connection)” tab
on the “Sample
のプロパティ
(Sample properties)” display.
(3)Uncheck “
国
/
地域番号と市外局番を使う
(Use country/
region code and city code)”.
(4)Click “OK”.
Then, go to step 7.
The properties of the COM port number
appear on the display, then click “OK”.
Ɣ
This display appears when you select a COM port number
in step 5.