Docomo FOMA P704IU, User Manual

Page: 484 / 528

15
3
“ ” (Communicating, data sending)
“ ” (Communicating, data receiving)
“ ” (Communicating, no data sending/receiving)
“ ” (Outgoing or being disconnected)
“ ” (Incoming or being disconnected)
Ɣ
During 64K data communication, “ ” appears on the FOMA
phone.
1
2
1
Click the dial-up icon on
the task tray to check for
the connection.
Ɣ
You can start the browser software to browse web pages,
use e-mail, and so on.
Ɣ
Use the FOMA phone with the dial-up setting completed for dial-
up connection. To connect another FOMA phone, you may need
to reinstall the communication setup files (driver).
Ɣ
The power consumption of the FOMA phone increases during
communication.
Ɣ
During packet communication, the communication state appears
on the FOMA phone.
Information
Disconnecting
Click the dial-up icon on
the task tray.
Click “
切断
(Disconnect)”.
Ɣ
The communication line may not be disconnected by only
exiting the browser software. To surely disconnect the
communication line, perform this operation.
Ɣ
The baud rate displayed on your personal computer may be
different from the actual one.
Information
Uninstalling FOMA PC Setup Software
Before Uninstalling
Before uninstalling the “FOMA PC setup software”,
reset the contents modified for the FOMA phone to
the default.
Exit the currently running programs.
Ɣ
Exit the “
通信設定最適化ソフト
(Communication setup optimization
software)”.
Right click “
通信設定最適化ソフト
(Communication setup optimization
software)” on the task tray at the bottom
right of the display, and select “
終了
(Exit)”.
Ɣ
Exit the “FOMA PC setup software”.
Click “
終了
(Exit)” at the bottom right of the FOMA PC setup
software.
Ɣ
If you try to uninstall during running of the “FOMA PC setup
software” or “Communication setup optimization software”,
the display below appears. Stop the uninstallation
processing, and exit those programs.
Right-click
Click