Docomo FOMA P704IU, User Manual

Page: 481 / 528

12
5
6
7
8
9
10
11
12
Enter an access point name.
You can specify any name for the currently created connection.
Enter a plain name in the “
接続名
(Access point name)” field.
Ɣ
You cannot enter the following half-pitch characters:
¥, /, :,
½ , ?, !, <, >, |, and ”.
Ɣ
In the “
接続先
(APN)
の選択
[Select an access point name
(APN)]” field, “mopera.ne.jp (PPP
接続
) [mopera.ne.jp (PPP
connection)]” is displayed as the default. Go to the “
接続先
(APN)
設定
[Set an access point name (APN)]” display.
Ɣ
Set whether to notify your caller ID for dial-up connection.
For the setting of the caller ID notification, follow the
instructions from the provider you use.
Click “
接続先
(APN)
設定
[Set an access
point name (APN)]”.
“mopera.ne.jp” is registered in “cid1” and “mopera.net” is
registered in “cid3” by default. Click “
追加
(Add)”, then enter
the correct access point name (APN) for FOMA packet
communication on the “
接続先
(APN)
の追加
[Add an access
point name (APN)]” display. Click “OK”.
The “
パケット通信設定
(Packet communication setting)”
display returns. Select the access point name (APN) you
specified newly. If it is ok, click “OK”.
Ɣ
For this FOMA phone, select “PPP
接続
(PPP connection)”
for “
接続方式
(connection type)” because it supports only
the PPP connection.
For a provider access point name (APN) or supported
connection types, contact your provider.
Click “
詳細情報の設定
(Set detailed information)”.
The display for specifying “IP
アドレス
(IP address)” and
“
ネームサーバー
(name server)” appears. When entering
dial-up information for the provider you have subscribed or
Intranet LAN system, specify addresses according to the
entry instruction information, then click “OK”.
Click “
次へ
(Next)”.
Specify “
ユーザー名
(User name)” and “
パ
スワード
(Password)”, then click “
次へ
(Next)”.
When specifying the user name and password, correctly enter
the information supplied from your Internet service provider,
taking care of uppercase and lowercase letters and so on.
Ɣ
Select a user optionally.
Put a check mark for “
最適化を行う
(Optimize)”, then click “
次へ
(Next)”.
Ɣ
If optimized already, the confirmation display to optimize
does not appear.
Confirm the set information, then click
“
完了
(Complete)”.
The set contents are listed on the display. Confirm that
there is no problem on the set contents, then click “
完了
(Complete)”.
Ɣ
To change the set contents, click “
戻る
(Back)”.
Ɣ
If “
デスクトップにダイヤルアップのショートカットを作成
する
(Create a dial-up shortcut on the desktop)” is checked,
a dial-up shortcut will be created on the desktop.
Click “OK”.
The setting is completed.
Open the dial-up shortcut icon automatically
created on the desktop; then the connection
display for starting communications appears. After
confirming that the connection starts, you can start the
Internet browser or mail browser for communication. (See
page 14)
Ɣ
To make the optimization valid, you need to restart the
personal computer.