Docomo FOMA P704IU, User Manual

Page: 202 / 528

200
Depending on the radio wave conditions, the characters might not be
displayed correctly at the destination.
The half-pitch katakana characters or pictographs might not be
displayed correctly except for the cases exchanging between i-mode
phones.
When the number of sent mail messages exceeds the FOMA phone’s
storage maximum, they will be overwritten from the oldest one.
However, protected sent mail messages cannot be overwritten.
When you select “Compose message” from the Function menu
while entering a phone number, the mail address is entered as a
destination address if the phone number and mail address are stored
in a Phonebook entry. When multiple mail addresses are stored in the
Phonebook entry, the first mail address is entered.
If you try to send the mail whose address is a phone number headed
by “184”/“186”, the confirmation display appears asking whether to
delete prefix numbers and send the mail.
You cannot send mail to the addresses that include a comma (,).
You can enter an address in the To, Cc and Bcc fields.
If the destination address has been stored in the Phonebook with a
secret code, the secret code will be added automatically at sending.
However, even if a secret code is stored in the Phonebook, the secret
code will not be added and the mail will be sent as ordinary i-mode
mail unless the address is a phone number or “phone number@
docomo.ne.jp”.
If you store the secret code and send mail to a mail address other
than that of DoCoMo mobile phones, you might not receive the error
message for unknown address.
Each line feed is counted as one full-pitch character, and a space is
counted as one full-pitch or half-pitch character.
Function Menu of the Message Composition Display
Function menu Operation/Explanation
Send You can send the mail message.
▶
OK
Preview Check the address, subject, text and attachments
before sending. After checking, press
( ).
You can send the mail message by pressing ( ).
Save When composing or editing the mail, you can save it to
the Draft.
Add receiver You can send the same mail to up to five addresses at
the same time.
▶
Select an item.
Phonebook
.... Call up a Phonebook entry and select a phone number
or mail address.
Sent address
... Select a phone number or mail address.
Received address
... Select a phone number or mail address.
Enter address
... Enter a mail address or phone number.
To consecutively add addresses, select <Not entered>
and repeat the above steps.
The added addresses can be deleted or changed
in “Delete receiver” (
Ÿ
page 200) and “Change rcv.
type” (
Ÿ
page 200).
▶ （ ）
Delete
receiver You can delete the selected address when there are
multiple addresses.
▶
YES
Change rcv.
type
▶
Select a type of address.
To ...... Direct destination address. (“To” recipients are
displayed at the receiving ends. ※ )
Cc ..... Specify to let parties know the mail contents in
addition to the direct recipients. (“Cc” recipients
are displayed at the receiving ends.
※
)
Bcc ... Specify to hide the recipients from others. (“Bcc”
recipients are not displayed at the receiving
ends.)
※
They might not be displayed depending on the mobile
phone, device, or mail software of the receiving end.
Information
Compose Message
Ż
Mail