Docomo FOMA P704IU, User Manual

Page: 476 / 528

7
Communication Setting by FOMA PC
Setup Software
STEP1 Install Software
Install the “FOMA PC setup software”.
See page 8 for installation.
If the older version than this “FOMA PC setup software”
(version 4.0.0) is already installed, you cannot install this
“FOMA PC setup software”, so uninstall it in advance.
See page 9 if the display appears to indicate that the old-
version “W-TCP
設定ソフト
(W-TCP setup software)”, or
the old-version “FOMA
データ通信設定ソフト
(FOMA data
communication setup software)” is installed.
STEP2 Prepare for Setup
Prepare for setup.
Before setup, confirm that the FOMA phone is connected
to your personal computer and correctly recognized by the
personal computer. See page 3 for how to connect the FOMA
USB Cable (option).
If the FOMA phone is not correctly recognized by the
personal computer, you cannot carry out settings and
communication. See page 6 for confirming whether the
FOMA phone is correctly recognized by the personal
computer.
See page 4 through page 6 for how to install the “P704i
ȝ
communication setup files” (driver).
STEP3 Setting Operation
Carry out the appropriate setting for the
communication you use.
Setting the packet communication from “Easy Setting”
When using “mopera U” or “mopera” as an access point
................................................................................page 10
When using a provider other than “mopera U” or “mopera”
................................................................................ page 11
Setting the 64K data communication from “Easy Setting”
When using “mopera U” or “mopera” as an access point
................................................................................page 13
When using a provider other than “mopera U” or “mopera”
................................................................................page 13
See page 16 for optimizing the packet communication
performance.
See page 17 for setting an access point name (APN).
STEP4 Connection
Connect to the Internet.
FOMA PC Setup Software
■
Easy setting
You can easily carry out “dial-up creation for FOMA data
communication” and “Communication setup optimization” by
following the guidance.
■
Communication setup optimization
Before using “FOMA packet communication”, optimize
communication settings in your personal computer.
To maximize the communication performance, communication
setup optimization is needed.
■
Access point name (APN) setting
You can set an access point name (APN) required for packet
communication.
The FOMA packet communication does not use an ordinary
phone number as an access point unlike the 64K data
communication.
You need to register an access point name (APN) in the FOMA
phone in advance, and specify the registration number (cid) in
the access point number field for connection.
By the default, “mopera.ne.jp”, the access point name (APN)
of “mopera”, is registered in cid
※ 1, and “mopera.net”, that of
“mopera U”, is registered in cid
※
3. To connect to another service
provider or Intranet LAN, however, you need to set the access
point name (APN).
※
“cid” is the abbreviation of “Context Identifier”, the number for
storing the packet communication access point name (APN) to
the FOMA phone.
To connect the FOMA phone to a personal
computer and perform the packet communication
or 64K data communication, you need to
configure various settings related to the
communication. Using the “FOMA PC setup
software”, you can easily carry out the settings
below. If required, you can set the packet
communication and 64K data communication
without using the “FOMA PC setup software”.
(See page 18 and page 28)
Ɣ
If the old-version “W-TCP
設定ソフト
(W-TCP setup software)”,
the old-version “FOMA
データ通信設定ソフト
(FOMA data
communication setup software)” or the older version than this
“FOMA PC
設定ソフト
(FOMA PC setup software)” (older than
version 4.0.0) is installed, uninstall it in advance.
Information