Docomo FOMA P704IU, User Manual

Page: 128 / 528

126
Passwords
For some functions of the FOMA phone, you need to enter your
password. In addition to the Terminal Security Code for operating
respective mobile phone functions, the Network Security Code to
use network services, and i-mode password are available. These
passwords help you utilize your FOMA phone.
Cautions on passwords
You should avoid using the numbers for passwords such as denoting your birth
date, part of your phone number, local address number, room number, “1111”
or “1234” that is easily decoded by a third party. Also make sure that you take a
note of the passwords you have selected just in case you forget them.
Take care not to let others know your passwords. Even if your passwords are
known and used by a third party, we at DoCoMo take no responsibility in any
event for the resultant loss.
Note that we at DoCoMo will never make any inquiries about your passwords.
If you do not remember your respective passwords, you need to bring an
identification card such as your driver’s license, the FOMA phone and UIM to
the handing counter of a DoCoMo shop.
For details contact “DoCoMo Information Center” on the back page of this
manual.
Terminal Security Code
The Terminal Security Code is set to “0000” at purchase but
you can change it by yourself.
Ÿ
page 127
When the display for entering the
Terminal Security Code appears
Enter your four- to eight-digit Terminal
Security Code.
When you enter your Terminal Security Code, the
entered numbers are indicated by “_” and not displayed.
If you have entered wrong numbers or nothing for
about 15 seconds, a warning tone sounds and a
warning message is displayed; then the display
prior to entering the Terminal Security Code returns.
Check the correct code and retry entering numbers.
Network Security Code
The Network Security Code is a four-digit number for procedures
on DoCoMo e-site or for using network services. This is
determined at the time of contract but can be changed by yourself.
If you have “DoCoMo ID/Password” for “My DoCoMo”, the overall
support site for personal computers, you can use a personal
computer to take proceedings of changing your Network Security
Code to new one. Also, you can change it by yourself from “
各種手
続き
(procedures)” on DoCoMo e-site by using the i-mode phone.
※
For “My DoCoMo” and “DoCoMo e-site (
ドコモ
e
サイト
)”, see the inside
back cover of this manual.
i-mode Password
You need to enter the four-digit “i-mode password” for registering
or deleting My Menu, applying for or canceling Message Services,
i-mode pay service, and so on.
(Some information providers may provide you with their specific password.)
The i-mode password is “0000” at the time of your contract,
but you can change it by yourself.
Ÿ
page 173
From i-mode, you can change the i-mode password by
following operation:
“
K
Menu”
ĺ
“English iMenu”
ĺ
“Options”
ĺ
“Change i-mode
Password”
PIN1 Code/PIN2 Code
For the UIM, you can set the two security codes, namely the PIN1
code and PIN2 code.
These security codes are “0000” at the time of your contract, but
you can change them by yourself.
Ÿ
page 128
The PIN1 code is the four- to eight-digit number for checking the user
each time the UIM is inserted into the FOMA phone or each time the
FOMA phone is turned on, so that you can prevent the third party from
using your UIM. By entering your PIN1 code, you can make or take calls,
or use functions in the FOMA phone.
The PIN2 code is the four- to eight-digit number for executing Reset
Total Cost, using the user certificate or applying for the issue of it, etc.
Passwords
Ż
Security Settings