Docomo FOMA P704IU, User Manual

Page: 253 / 528

251
▶▶
Next Page
Information
Some IPs (Information Providers) may access the software program
stored in your mobile phone and have it directly halted, depending
on the software program. In that case, you will not be able to start or
update the software program, or use it for the Stand-by display. You
can delete it or display the software information. To resume running
the software program, you need to receive the communication to
cancel the software halting state. Contact the IP (Information Provider)
to inquire about that.
Some IPs (Information Providers) might send data to the software
program stored in your mobile phone depending on the software
program.
When the IP (Information Provider) requests to halt or re-open the
software program or sends data to it, the mobile phone communicates
and “ ” is displayed. In this case, you are not charged a communication
fee.
Function Menu of the Software List
Function menu Operation/Explanation
Set
K D
ppli To You can set whether to permit the i-
D
ppli program to
start from links on sites or mail. You can set this for each
software program.
▶
Put a check mark for items to be set
▶
( )
Some items might not be set depending on the
software program.
Auto start
time You can set the date and time for Auto Start.
Ÿ
page 258
Software setting
(Stand-by set) You can set the software program as the i-
D
ppli Stand-by
display.
Ÿ
page 259
Software
setting
(Network set) You can set whether to communicate while i-
D
ppli is
running.
▶
Network set
▶
ON, OFF or Check every start
▶
( )
If you select “Check every start”, the confirmation
display appears each time you start i-
D
ppli.
Software setting
(Stand-by net) You can set whether to communicate while the i-
D
ppli
Stand-by display is running.
Ÿ
page 259
Software
setting
(Icon info) You can set whether to permit the i-
D
ppli to use information
of icons for the i-mode mail, SMS messages, Messages
R/F, battery level, Manner Mode and the service area/out-of-
service area.
▶
Icon info
▶
ON or OFF
▶
( )
Software
setting
(Change
mld./img.) You can set whether to permit the i-
D
ppli to change the
setting for ring tones or the Stand-by display.
This function is available only for i-
D
ppli DX.
▶
Change mld./img.
▶
ON, OFF or Check every change
▶
( )
If you select “Check every change”, the confirmation
display appears each time you change the setting for
ring tones and the Stand-by display from i-
D
ppli.
i-
D
ppli
Ź
i-
D
ppli Run