Docomo FOMA P704IU, User Manual

Page: 143 / 528

141
Delaying Start of Ringing Operation
<Ring Time>
1
▶ ▶
Incoming call
▶
Ring time
▶
Do the following operations.
Item Operation/Explanation
Ring start
time You can specify the time before ringing starts, for when a
voice call or videophone call comes in from the party whose
phone number is not stored in the Phonebook. This function
is effective as a countermeasure for blocking nuisance calls
such as one ring phone scam (one-giri).
▶
ON or OFF
▶
Enter a start time (seconds).
Enter from “01” through “99” in two digits.
Missed calls
display You can set whether to display the call disconnected
within the time specified for “Ring start time” in Received
Calls.
▶
Display or Not display
Setting at purchase
Ring start time: OFF
Start time: 1 second
(when “Ring start
time” is set to “ON”)
Setting at purchase
Display
Information
When a call comes in from the party whose phone number is stored in the
Phonebook, the FOMA phone starts ringing as soon as the call comes
in even if “186”/“184” is added to the phone number. However, during
PIM Lock, or for the call from the party whose phone number is stored as
secret data, ringing starts according to the setting of this function.
If the ring start time is longer than the ring time for Record Message,
the ringing operations do not start, activating Record Message instead.
To activate Record Message after starting the ringing operations, set
the longer ring time for Record Message than the ring start time. The
same applies to the ring time for Voice Mail Service, Call Forwarding
Service, and Automatic Answer.
Setting at purchase Accept
Rejecting Calls from Phone Numbers
which are not Stored in Phonebooks
<Reject Unknown>
You can reject voice calls and videophone calls from the party
whose phone number is not stored in the Phonebook.
This function is valid only when the other party notifies his/her
phone number. It is advisable to activate “Caller ID request”
and “Call setting w/o ID” simultaneously.
1
▶ ▶
Lock/Security
▶
Reject unknown
▶
Enter your Terminal Security Code
▶
Accept or Reject
Information
During PIM Lock or if a call comes in from the party whose phone
number is stored as secret data, the call is not rejected, regardless of
this setting.
If you simultaneously activate “Reject unknown” and “Call acceptation”
of “Restrictions”, the latter has priority.
When a call comes in from anyone whose phone number is not
stored in the Phonebook while you set this function to “Reject”, the
call is recorded in “Received calls” as a missed call record, and the
Notification icon of “Missed call” appears on the Stand-by display. Also,
the caller hears a busy tone even if you have set Voice Mail Service
or Call Forwarding Service to “Activate”. However, if you set the ring
time for Voice Mail Service or Call Forwarding Service to 0 seconds,
when the FOMA phone is out of the service area, or when the power is
turned off, the busy tone will not be played back, activating Voice Mail
Service or Call Forwarding Service.
Even when this function is set to “Reject”, your FOMA phone follows
the settings specified by “Call setting w/o ID” if each setting of “Call
setting w/o ID” is set to “Accept”.
You can receive SMS messages or i-mode mail regardless of this setting.
You cannot set “Reject unknown” to “Reject” while “Ring start time” of
“Ring time” is set to “ON”.
Security Settings
Ź
Ring T
ime