Docomo FOMA P704IU, User Manual

Page: 510 / 528

41
Ɣ
The access point name (APN) is information to be registered in
the FOMA phone, so if you connect another FOMA phone, you
need to register the access point name (APN) again.
Ɣ
To continue using the access point name (APN) of the personal
computer, register the same access point name (APN) for the
same cid number in the FOMA phone.
Information
Confirm the COM port number
Start the communication software that enables
the entry of AT commands
Set an access point name (APN)
Set “caller ID notified/not notified”
Set others
Exit the communication software
■
AT commands
Ɣ
The AT commands are used to control a modem. The FOMA
phone, which conforms to the AT commands, supports some
extended commands and unique AT commands.
Ɣ
By entering AT commands, you can carry out detailed setting
for packet communication and FOMA phone, and confirm
(display) the setting contents.
Ɣ
If the entered AT command is not displayed, enter “ATE1 ”.
Set Packet Communication
The operation below explains how to set a
connection for packet communication without
using the “FOMA PC setup software”.
The packet communication uses AT commands to
carry out the settings from a personal computer.
To specify settings, communication software to
enter AT command is required.
When using DoCoMo Internet access service
“mopera U” or “mopera”, you do not need to set
an access point name (APN) (see page 42).
You can set “caller ID notified/not notified” (see
page 42) as required. (You need to set “caller ID
notified” when using “mopera U” or “mopera”.)
Setting Dial-up Network
<Packet communication setting flow using AT commands>
1
2
3
4
Confirm COM Port Number
To manually carry out the communication setting,
you need to specify a COM port number, which is
assigned to “FOMA P704i
ȝ
” (modem) embedded
after you install the “P704i
ȝ
communication setup
file” (driver). The confirmation method varies
depending on the operating system of your
personal computer.
Ɣ
When using DoCoMo Internet access service “mopera U”
or “mopera”, you do not need to set an access point name
(APN); therefore, you do not need to confirm the modem.
Ɣ
The COM port number you confirmed is used to set an
access point name (APN) (see page 42).
Ɣ
The contents on the property display and COM port number
vary depending on the personal computer you use.
Ɣ
Windows Vista does not support “Hyper Terminal”. For
Windows Vista, set by using a software program which
supports Windows Vista. (Follow the settings of the
software program you use.)
“
[スタート
(Start)
]
”
Ź
Open “
コント
ロールパネル
(Control panel)”.
From “
ハードウェアとサウンド
(Hardware
and sound)” in “
コントロールパネル
(Control panel)”, open “
電話とモデムのオ
プション
(Phone and modem options)”.
If the “
所在地情報
(Address information)”
display appears, enter “
市外局番
/
エリア
コード
(City code/Area code)”, then click
“OK”.
Open the “
モデム
(Modem)” tab, confirm
the COM port number in the “
接続先
(Access point)” field of “FOMA P704i
ȝ
”,
then click “OK”.