Docomo FOMA P704IU, User Manual

Page: 47 / 528

45
1
Press and hold for at least
one second.
Turn Power On
After the Wake-up display (
Ÿ
page 111) is
shown, the Stand-by display appears.
If you have stored many Phonebook entries
or mail messages, it may take a while for the
display to appear.
If Set Time is set, the current date and time
are shown.
When “
” is displayed, the FOMA phone
is out of the FOMA service area or in the
place where the radio waves do not reach.
Move to a location where “
” disappears.
If “Starting system Wait a minute” is
displayed, wait for a while and then proceed.
Turning Power On/Off
<Power ON/OFF>
Stand-by display
When your UIM is replaced (except during Omakase
Lock)
Enter the four- to eight-digit Terminal Security Code after turning on the
power. When you enter the correct Terminal Security Code, the Stand-by
display appears.
If you enter the incorrect Terminal Security Code five times in succession,
the power turns off. (However, you can turn on the power again.)
When “PIN1 code entry set” of “PIN setting” is set to
“ON”
Enter the four- to eight-digit PIN1 code after you turn on the power.
When the correct PIN1 code is entered, the Stand-by display appears.
PIN1 code
Ÿ
page 126
When “Auto reset setting” of “Notice call cost” is set
to “ON” (except during Omakase Lock)
Enter the four- to eight-digit PIN2 code after you turn on the power. When the
correct PIN2 code is entered, the Stand-by display appears. If you press
or
without entering the correct PIN2 code, “Auto reset setting” is set to
“OFF” and the Stand-by display appears. PIN2 code
Ÿ
page 126
1
Press and hold for at least two seconds.
Turn Power Off
The exit display appears and the power turns off.
You cannot turn on the power immediately after turning off the
power. Wait a few seconds.
Switching to English
<Select Language>
Setting at purchase Japanese
1
▶ ▶ ディスプレイ
(Display)
▶ バイリンガル
(Select language)
▶
Japanese (
日本語
) or English (
英語
)
The following functions are different between Japanese display
and English display:
Functions Japanese English
“Display” of Clock Display
日本語
(Japanese)
英語
(English)
OFF
Not available
ON
OFF
Info Notice Setting
電子音 (
Electrical tone)
ボイス
(Voice)
OFF
ON
Not available
OFF
使いかたナビ
(Guide) Available Not available
Information
When the UIM is inserted, the “
バイリンガル
(Select language)”
setting is stored on the UIM.
The voice guidance is not provided while “
バイリンガル
(Select
language)” is set to “English (
英語
)”.
Before Using the Handset
Ź
Power ON/OFF