Docomo FOMA P704IU, User Manual

Page: 521 / 528

52
AT command Outline Parameter/Explanation
Command execution
example
ATS4=n
[M]
[&F]
Sets the line feed (LF)
character. n=10: Default (n=10 only speci
fi
able)
ATS4?: Inquires the set value.
ATS4=10
OK
ATS4?
010
OK
ATS5=n
[M]
[&F]
Sets the back space (BS)
character. n=8: Default (n=8 only speci
fi
able)
ATS5?: Inquires the set value.
ATS5=8
OK
ATS5?
008
OK
ATS30=n
[M][&F]
Sets the inactive timer (minute).
When no user data is sent or
received, the connection is cut
after the set time has elapsed.
This command is for only 64K
data communication. When 0
is set, the inactive timer turns
to OFF. n=0 to 255 (default=0) (unit: minute) ATS30=0
OK
ATS103=n
[M][&F]
Selects characters to pause
for incoming sub-address. n=0: ½ (asterisk)
n=1: / (slash) (default)
n=2: ¥ or back slash
ATS103=0
OK
ATS104=n
[M][&F]
Selects characters to pause
for outgoing sub-address. n=0: # (sharp)
n=1: % (percentage) (default)
n=2: & (and) ATS104=0
OK
ATVn
[M]
[&F][&W] Sets all the result codes in
the numeric or alphabetical
notation. n=0: Returns the result code in a numeric value.
n=1: Returns the result code in alphabetical
characters. (default)
ATV1
OK
ATXn
[M]
[&F][&W]
Sets whether to display the
speed in the CONNECT
display at connection.
Detects busy tone and dial
tone. n=0: Dial tone not detected; busy tone not
detected; speed not displayed.
n=1: Dial tone not detected; busy tone not
detected; speed displayed.
n=2: Dial tone detected; busy tone not detected;
speed displayed.
n=3: Dial tone not detected; busy tone detected;
speed displayed.
n=4: Dial tone detected; busy tone detected;
speed displayed. (default)
ATX1
OK
ATZ
[M]
Resets the setting to
the contents of the
nonvolatile memory. If this
command is entered during
communication, the line is
disconnected.
−
(In online)
ATZ
NO CARRIER
(In of
fl
ine)
ATZ
OK
AT¥S
[M]
Displays the contents of
the each command and S
register currently set.
−
AT¥S
E1 Q0 V1 X4 &C1
&D2 &S0 ¥V0
S000=000
S002=043
S003=013
S004=010
S005=008
S006=005
S007=060
S008=003
S010=001
S030=000
S103=000
S104=000
OK
AT¥Vn
[M]
[&F][&W] Selects the response code
speci
fi
cations at connection.
n=0: Does not use the extended result code.
(default)
n=1: Uses the extended result code.
AT¥V0
OK
※
The following commands do not result in an error even if specified; however, they do not function as commands.
・
AT (AT only entered.)
・
ATT (Tone setting)
・
ATP (Pulse setting)
・
ATS6 (Setting the pause time taken for dialing)
・
ATS8 (Setting the pause time by comma dialing)
・
ATS10 (Setting the automatic disconnection delay time)