![Docomo FOMA P704IU User Manual Download Page 142](http://html1.mh-extra.com/html/docomo/foma-p704iu/foma-p704iu_user-manual_2515003142.webp)
140
Information
When a call comes in from the phone number set with “Call rejection”,
or from other than the phone number set with “Call acceptation”, the call
is recorded in “Received calls” as a “missed call record” and the icon of
“Missed call” appears on the Stand-by display. Also, the caller hears a busy
tone even if you have set Voice Mail Service or Call Forwarding Service
to “Activate”. However, if you set the ring time for Voice Mail Service or
Call Forwarding Service to 0 seconds, when the FOMA phone is out of
the service area, or when the power is turned off, the busy tone will not be
played back, activating Voice Mail Service or Call Forwarding Service.
You can receive SMS messages or i-mode mail regardless of the
setting of “Call rejection” or “Call acceptation”.
Check/Release Restrictions on Phonebook Entries
1
Stand-by display
▶
▶
Restrictions
▶
Enter your Terminal Security Code
▶
Select an item.
Restrict dialing
......
⇒
page 139
Call rejection
.........
⇒
page 139
Call acceptation
....
⇒
page 139
Call forwarding
.....
⇒
page 366
Voice mail
..............
⇒
page 362
You can check/release Restrictions also by
(
)
ĺ
“Check
settings”.
The set item is indicated by “
★
”.
To release all the Phonebook entries set with Restrictions;
(
)
ĺ
“Release”
ĺ
“YES”.
2
Select a Phonebook entry.
The phone number set with Restrictions is displayed.
To release Restrictions per phone number, select the phone number you
want to release by following the same steps above, and select “YES”.
Setting at
purchase
Not supported: Accept/Same as ring tone
Payphone: Accept/Same as ring tone
User unset: Accept/Same as ring tone
Setting Response to Incoming
Calls without Caller ID
<Call Setting without ID>
You can set whether to receive (accept) or not to receive (reject) a voice
call and videophone call depending on the reason for no caller ID. There
are three reasons; “Not supported”, “Payphone”, and “User unset”.
1
▶
▶
Lock/Security
▶
Call setting w/o ID
▶
Enter your Terminal Security Code
▶
Select an item.
Not supported
... Calls from the other party who cannot notify his/her
phone number such as calls from overseas or from
landline phones via call forwarding services.
(However, the caller ID might be notified depending
on the telephone companies the calls go through.)
Payphone
.......... Calls from payphones, etc.
User unset
......... When the caller has set the caller ID not to be notified.
2
Accept or Reject
If you select “Accept”, go to step 3 on page 103 to select a type of
ring tone. If you select “Same as ring tone”, the ring tone will be
the one selected in “Phone” of “Select ring tone”.
Information
If you select “Reject”, the ring tone does not sound even if a call comes
in, the call is recorded in “Received calls” as a missed call record and the
“Missed call” icon appears on the Stand-by display. Also, the caller hears
a busy tone even if you have set Voice Mail Service or Call Forwarding
Service to “Activate”. However, if you set the ring time for Voice Mail Service
or Call Forwarding Service to 0 seconds, or when the FOMA phone is out of
the service area, or when the power is turned off, the busy tone will not be
played, activating Voice Mail Service or Call Forwarding Service.
You can receive SMS messages or i-mode mail regardless of this setting.
Call Setting without ID
Ż
Security Settings
Summary of Contents for FOMA P704IU
