Desoutter Delta Wrench 150 Nm, User Manual, Page: 96 / 184

Part Number
Issue
Date
Page 6159937790
12
03/2018
96 / 184
03/2018 96 (184)
Torque/angle results :
-
If the torque/angle does not exceed the torque/angle limits, the result is taken at the torque peak
or angle peak as specified in the Pset options.
- If the torque/angle goes over the limit, the result is taken as follow:
The Delta Wrench display background is colored as follows:
Blue Default color used for Pset execution.
Green The display turns green if the test ends with OK result.
Red Torque and/or angle over the maximum limits .
The buzzer is activated as follows:
Buzzer The beep emitted by the buzzer starts when the torque goes over the Cycle
Start value, and it increases its signal when approaching the target.
At the end of the tightening operation three more beeps inform the operator of
the end of the operation; if the torque (or angle) goes over the maximum
values, the beep is repeated at high frequency to indicate the error.
For information on the vibration function, refer to the paragraph “Vibration parameter”.
NOTE: Vibration is available only for the following Delta Wrench models: TORQUE/ANGLE
MODELS WITH VIBRO and TORQUE/ANGLE MODELS WITH VIBRO AND WLAN RADIO
MODULE.
Torque peak selected in the Pset options Angle peak selected in the Pset options
Torque peak
Torque peak
Angle peak
Angle peak