Part Number
Issue
Date
Page
6159937790
12
03/2018
72 / 184
03/2018
72 (184)
5.2
Executing a Demo Test
The
Demo Mode
executes a test (tightening operation or quality control test) by accessing the Delta
Wrench from the keyboard; during the test, it is not mandatory to program Delta Wrench with DeltaQC
Software.
NOTE
: In the
Demo Mode
the results are not saved in the Delta Wrench memory.
To perform a Demo Test, select
Demo Mode
from the main menu:
Then, select the desired operation and click on
OK
on the Delta Wrench keyboard to start the test.
NOTE
: The
Demo Mode
measurement unit can be set in the
Settings
menu of the Delta
Wrench.
5.2.1
Track
Track
mode can be used to execute a very simple tightening operation in which the operator tightens
the screw at the desired torque, monitoring the torque applied on the Delta Wrench display.
In
Track
mode, the Delta Wrench displays the applied torque in real time.
Torque can be applied in either the clockwise (positive torque) or counterclockwise (negative torque)
direction.
By clicking on
OK
on the Delta Wrench keyboard the Delta Wrench executes a torque zero
adjustment.
NOTE
: The zero adjustment is applied only for this test; it is not applied as a global zero
reference for the Delta Wrench.
Torque
Time