Desoutter Delta Wrench 150 Nm, User Manual, Page: 123 / 184

Part Number
Issue
Date
Page 6159937790
12
03/2018
123 / 184
123 (184) 03/2018
When opening the Statistics page, the following screen is shown:
Select the
General folder of this window.
When
offline , select Delta Wrench as device to view statistics from the results produced by the Delta
Wrench; if online , the device field is automatically set ( Delta Wrench ).
Select the
Measure ( Torque or Angle ) on which to calculate the statistics.
The
Test type is automatically set to Quality/Production .
Select the
Check ( Cmk/Cpk or SPC) .
Select the
Standard ( ISO , CNOMO (E41.32.110N) , NF (E 60-181) , Normal distribution test
(Shapiro-Wilk) , Normal distribution test (Chi-Squared), Q544000:2004, Q544000:1990) . This field
selects the method used to calculate the statistical parameters (refer to the next paragraphs of this
chapter for further details about the statistical computation formulas used by the DeltaQC software).
Set the expected value (minimum values acceptable) for the parameters shown in the
Parameters
box.
NOTE : In the Parameters box, only the parameters applicable to the Test and Standard type
selected are shown.
Select the Measure , Test,
Check and Standard type;
then set the Parameters