Part Number
Issue
Date
Page
6159937790
12
03/2018
166 / 184
03/2018
166 (184)
In the
Parameters
page, insert the network parameters in order to establish the connection between
the Delta Wrench and the Open Protocol:
SSID
Enter the SSID name of the own wireless network.
WLAN
mode
Access Point
is selected.
Host name
Specify the name of the Delta Wrench; if there are more than one Delta
Wrench the names must be different.
Port number
Specify the port number of the Delta Wrench that the remote device must use
to link with.
Internet protocol
(TCP/IP)
Select
Enabled DHCP
if the network works with the
DHCP protocol
: the
Internet protocol configuration is set automatically.
On the other hand, it is possible to set manually the Internet Protocol
configuration by disabling the
DHCP
.
At the end of data entry,
store the data inserted
by clicking on
Store
key