Part Number
Issue
Date
Page
6159937790
12
03/2018
60 / 184
03/2018
60 (184)
2. By acting on the
Curves viewer
toolbar, click on
Device configuration
:
The following screen is displayed:
The above
Device Configuration
screen includes two tab:
Device List
and
Network Diagnostic
.
The
Device List
tab is divided in two sections:
Configuration
section and
Connection Test
section.
The
Configuration
section includes four areas and each of them corresponds to a specific Delta
Wrench.
To configure the Delta Wrench, it is MANDATORY to define the following fields:
Working Mode
Select between:
•
Real Time
:
Real Time
option displays curves in real time (during
Delta Wrench operations).
•
End of Tightening
:
End of Tightening
option displays curves only at
the end of the tightening.
Device configuration
Device List
tab
Test
button
Frequency Rate
Working Mode
IP Address
Port Number
Connection Test
section
Configuration
section