Desoutter Delta Wrench 150 Nm, User Manual, Page: 145 / 184

Part Number
Issue
Date
Page 6159937790
12
03/2018
145 / 184
145 (184) 03/2018
The Results Viewer page shows a group of records (organized in columns) that meet the search
criteria set by the customer.
The most important columns are summarized in the following table:
Pset number The Pset number is defined in the Pset data.
Status This is the global status of the test. It is OK when the result has
been detected according to the thresholds and limits specified, and
if the torque does not exceed the maximum transducer overload.
Torque Status These fields indicate the result for the torque. If the result is within
the torque limits, the status is
OK .
If the Check Type in the Pset parameters is set to Angle , the torque
status is marked as OK regardless the torque is inside or outside
the torque limits specified in the Pset.
If the torque goes over the maximum transducer overload the result
is marked as
HIGH . With reference to the Result details field, an
overload result is marked with
the “Overload detected” message.
Angle Status These fields indicate the result for the angle. If the result is within
the angle limits the status is
OK .
If the Check Type in the Pset parameters is set to Torque , the angle
status is marked as OK regardless the angle is inside or outside the
torque limits specified in the Pset.
Result number Progressive number automatically assigned by the Delta Wrench to
every tightening result.
Min value: 1
Max value: 1000
When 1000 results are stored in the Delta Wrench memory, the new
results overwrite the oldest starting from result number
1 .
Strategy Type of test executed.
Torque peak
For Residual Torque/Angle and Residual Torque/Angle Automatic
strategies, it indicates the maximum torque reached during the test.
Torque result and Angle
results
Torque and angle values measured by the Delta Wrench.
Date / Time Fields indicating the date and time of the tightening operation. Date
and time are taken from the date and time set on the Delta Wrench.
Batch status If the batch size is zero, the Batch status is always OK.
If the batch size is one or more, the Batch status is OK when all the
Psets of the batch are OK.
Unit of Measurement Unit of measurement.