Desoutter Delta Wrench 150 Nm, User Manual, Page: 78 / 184

Part Number
Issue
Date
Page 6159937790
12
03/2018
78 / 184
03/2018 78 (184)
6 PSET
The set of parameters that controls the tightening process is contained within a so-called Pset . This
section describes how to setup the Pset parameters necessary to perform a tightening.
The Delta Wrench can store up to
200 Psets in its memory.
For creating a new
Pset , either click on
“
Parameter set
” icon placed in the
Build area or right click on
Pset (placed in the Assembly Line area ); thus
click on “ Create a new Pset… ” (refer to the following
screen):
The following screen is shown:
Select the Pset
Number (it is not possible to use numbers already assigned to other Psets), and
insert the Pset Name ; then click on OK icon to confirm:
By default it is
assigned the first Pset
Number available
1. Select the
Pset
Number
2. Insert the
Pset
Name
3. Click on OK
to confirm
Build area
Assembly Line area