Desoutter Delta Wrench 150 Nm, User Manual, Page: 117 / 184

Part Number
Issue
Date
Page 6159937790
12
03/2018
117 / 184
117 (184) 03/2018
8.2.1.2 Delta Wrench date and time
Date and time
Date and time shown on the main menu of the Delta Wrench display.
These date and time are associated to the tightening results and curves.
Click on to align the Delta Wrench date and time to the date and time
of your PC connected to the Delta Wrench.
8.2.1.3 Delta Wrench display language
Language
Select the language of the Delta Wrench menu. This is also possible
from the Delta Wrench
Settings menu (refer to the paragraph
“
Settings Menu on Delta Wrench
”).
The Settings menu on the Delta Wrench display is active only if
enabled (
refer to the paragraph “
Delta Wrench Controller Setup
” for
further details).
8.2.1.4 Result confirmation options
Results confirmation
option
Select between:
▪
Never : All the tests executed are acquired as test result.
▪
Always : At the end of each test, the Delta Wrench asks if the
result must be considered or discarded.
▪
NOK only : At the end of each Not OK test, the Delta Wrench
asks if the result must be considered or discarded. If the result is
discarded, the batch count (if enabled) is not incremented.
8.2.1.5 Batch increment condition
Batches increment
condition
It selects if the batch number for a Pset is incremented only if the
result is OK, or if it is incremented anyway, regardless of the result
(OK + NOK).
8.2.1.6 Batches running mode
Batches running mode
This parameter is used only for Quality Control strategies and it is not
applicable to Production strategies .
Select between:
▪
Reset mode : When a batch is quit, the batch count is reset.
▪
Restore mode : When a batch is quit, the batch count is not reset,
and it is possible to continue the batch at a later time: