Desoutter Delta Wrench 150 Nm, User Manual, Page: 64 / 184

Part Number
Issue
Date
Page 6159937790
12
03/2018
64 / 184
03/2018 64 (184)
NOTE : If the network connection is up, the data inserted inside the parameters list
(placed on the left side of the above screen) are blue colored.
If the network connection is down, the data inserted inside the parameters list are red
colored.
5. Configure a Pset (for further details about the Pset configuration, refer to the paragrap
h “
Pset
”).
Select the configured Pset manually in the Pset menu from the main menu of the Delta Wrench:
Finally, click on Start (placed on the right lower corner of the above Pset menu).
6. The DeltaQC Real Time Monitor shows the following screen:
NOTE : The above example refers to a Torque Time control strategy: in fact, the Angle
Parameters (see the Pset parameters section) are equal to 0.
On the graph, it is possible to display only T
max
and T
min
lines (red lines) and Torque
Target line (green line).
Pset parameters section
Torque Target line
T
max
line
T
min
line