Delta AX-3 Series, Operation Manual

Page: 315 / 370

C h a p t e r 9 C o m m u n ic a t i o n
9 - 5
9_
9.1.3 Setting up the EtherCAT Slave
This section introduces functions in the tab of Slaves. You can either scan the network to add the slaves in or add slaves
from the Product list. Refer to section 6.1.3 for more information.
①
②

General

Address
➀
EtherCAT address: Final address of the slaves, assigned by the master during bootup. The address is
independent of the position of the slave in the network.

Distributed Clocks
➁
Select DC: Cycle time for the data exchange.