Delta AX-3 Series, Operation Manual

Page: 114 / 370

AX - 3 S e r ie s O p e r a t i o n M a n u a l
6 - 4
_6

Network Type and Communication Port

EtherCAT
The orange yellow line indicates the EtherCAT communication. Double-click the Master station node to open the
EtherCAT setting page of the Master. The number of Master Station is 0 and that cannot be changed. Double-click
the connection of Slave to open the EtherCAT setting page of the Slave. The last digit appeared in the EtherCAT
address 1001 is used as an indicator of this connection on the Network Configuration Editor page.

Modbus TCP/EtherNETIP
The blue line indicates the Modbus TCP/EtherNetIP communication. Double-click this line to open its setting page to
edit IP addresses. The last digit appeared in the last section of the IP address is used as an indicator of this
connection on the Network Configuration Editor page.

Modbus
The blue line indicates the Modbus communication (RS-232 / RS-485). Double-click this line to open the Modbus
communication port setting page.