C h a p t e r 9 C o m m u n ic a t i o n
9 - 1 5
9_
9.2.2.3 Setting up Delta Modbus Slave COM
In the tree view, find the added port
Delta_Modbus_Slave_COM_Port (Delta Modbus Slave COM Port).
Double-click it to open the setting window to set up.
General
Here you can configure the basic settings for Modbus Serial Slave, such as Slave Address, Response Timeout
and Device Type.
Item
Description
Slave Addres
Address of a serial Modbus device (value between 1 and 247)
Response Timeout
Time interval for the master to wait for the response from the slave. This is
especially configured for this slave node and overwrites the general response
timeout setting of the respective master.
Device Type
You can select standard Modbus devices or Delta devices. If you select Delta
devices, the system converts the protocol used into Modbus protocol
automatically so that you do NOT need to refer to the register map for the
conversion.
Summary of Contents for AX-3 Series
