AX - 3 S e r ie s O p e r a t i o n M a n u a l
A - 1 4
_A
_A
A.4
Troubleshooting of I/O Modules
Introduction to troubleshotting modules
The following AS series modules can be installed in an AX-3 Series system. There are 2 types of error codes; error
and warning. The CPU module and its modules stop operating when errors occur. The CPU modules and its
modules do not stop operating when warnings are triggered.
A.4.1
Troubleshooting of Analog Modules (AD/DA/XA) and
Temperature Modules (RTD/TC)
A.4.1.1
ERROR
ERROR LED Indicators Are ON
You can set up the option to be
True
in
Module Alarm Setting
to have the following errors appear as warnings when
they occur. Otherwise, when an error occurs, only an error message appears.
Error
Code
(16#)
Description
Solution
16#1605
Hardware failure
If the problem persists, contact the local authorized
distributors.
16#1607
The external voltage is abnormal.
Check the power supply.
16#1608
The factory calibration or the CJC is
abnormal.
If the problem persists, contact the local authorized
distributors.
A.4.1.2
ERROR LED Indicators Blinking Every 0.2 Seconds
The following errors are specified as warnings to ensure that the AX-3 Series CPU can still run even when the warnings
are triggered by its AIO modules. If you need the CPU STOP running immediately when the first 4 errors occur, you need
to set the them as errors.
Error
Code
(16#)
Description
Solution
16#1801
The external voltage is abnormal.
Check the power supply.
16#1802
Hardware failure
If the problem persists, contact the local authorized
distributors.
16#1804
The factory calibration is abnormal.
If the problem persists, contact the local authorized
distributors.
16#1807
The CJC is abnormal.
If the problem persists, contact the local authorized
distributors.
16#1808
The signal received by channel 1
exceeds the range of analog inputs
(temperature).
Check the signal received by channel 1
16#1809
The signal received by channel 2
exceeds the range of analog inputs
(temperature).
Check the signal received by channel 2
16#180A
The signal received by channel 3
exceeds the range of analog inputs
(temperature).
Check the signal received by channel 3
16#180B
The signal received by channel 4
exceeds the range of analog inputs
(temperature).
Check the signal received by channel 4
Summary of Contents for AX-3 Series
